Mounts
 POWER HOUSE is a top quality producer of solar mounts for a variety of applications. We use only the highest-grade aluminum (6063 and 5052), and powder-coated steels available and can have your mounts available with one of the fastest lead times around. Trust Home Energy for all of your mounting needs. * POWER HOUSE roof mounts are available with made in Ontario certification when required.
 |
 |
 |
SRM Mounting | Sloped Roof Mounts
 Sloped Roof Mount – Made In Ontario
POWER HOUSE Sloped Roof Mounts feature innovative mounting solutions such as adjustable height, and self sealing feet. These mounts easily attach to any ash-vault shingle or metal roof top.
|
| Model |
SH 230/235/240 |
| PH11-SH235 |
11 Panel System |
| PH12-SH235 |
12 Panel System |
|
 SPEC Sheets: HES Solar Mount Options
|
 |
Fast Rack
 Designed for metal roofs and larger installs, it makes installs quick and seamless with integrated grounding and a 6 foot span on centre.
|
| Model |
Summary |
| FR-RAIL20 |
Fast Rack Rails, 20', Bundle of 12 pieces (for 36 modules) |
| FR-RAIL13.4 |
Fast Rack Rails, 13.4', Bundle of 12 pieces (for 24 modules) |
| FR-FEET |
Fast Rack L-Feet, Hardware, Box of 25 |
| PH-FR-SPLICE |
Fast Rack Splice Kit with Ground Strap, Box of 12 |
| FR-MID |
Fast Rack Mid Clamps with Weeb Washers, Box of 25 |
| FR-END |
Fast Rack End Clamps with bolts, Box of 12 |
| FR-T-PROOF |
Fast Rack Tamperproof Hardware with Driver, Box of 25 |
| FR-GRNLUG |
Fast Rack Ground Lugs, Box of 12 |
| EJOT-8.0 |
Adjustable Anchor Bolt for Steel Roofing - 5.5", Each |
| FR-FLASHING |
Fast Rack Flashing Kit, Box of 25 |
|
SPEC Sheets: Fast Rack
|
 |
VRM | Vertical Roof Mount
 Secure your solar panels with these simple, inexpensive roof mounts. Larger mounts hold the panels vertically, side by side. These roof mounts feature adjustable aluminum brackets that allow the angle to be optimized for your location.
Secure to a roof with bolts or screws; the solar array will be rigid and strong. The user is responsible to supply hardware for fastening the mount to the roof into the roof trusses/structural members. For roof top installation we recommend stainless steel 3/8" lag bolts.
|
| |
SH-80
| SH-130 |
SH-170 |
SH-230 |
| VRM2 |
- |
VRM2-SH-130 |
VRM2-SH-170 |
VRM2-SH-230 |
| VRM3 |
VRM3-SH-80 |
VRM3-SH-130 |
VRM3-SH-170 |
VRM3-SH-230 |
| VRM4 |
VRM4-SH-80 |
VRM4-SH-130 |
VRM4-SH-170 |
VRM3-SH-230 |
|
|
 |
FRM | Floating Integrated Roof Mounts
 Flat Integrated Roof Mount – Made In Ontario
Securing solar arrays to flat Canadian roofs is a challenge. Our ballasted roof mounts can be installed without roof penetrations, yet are light enough to keep roof loads down. Our FRM mounts are individual panel mounts that connect together. Two tilt options: 10º and 30º.
|
| Model |
Summary |
| FRM-10 |
For SH-230-ON, 10 degree tilt |
| FRM-30 |
For SH-230-ON, 30 degree tilt |
|
SPEC Sheets: HES Solar Mount Options
|
 |
2TGM | Two Tier Ground Mount
 Ground Mount – Made In Ontario
POWER HOUSE 2 Tier Ground Mounts support 2 rows of Sharp solar panels above snow accumulations and safe from grazing animals. Our all aluminum mounts are structurally approved, and designed to be attached to parallel footings or beams spaced 3m apart. We have full footing and beam plans available. 6 and 8 panel building blocks allow you to customize for any size Sharp PV array. Mounts large arrays securely and inexpensively!
|
| Model |
Summary |
| PH-2T-GM6 |
Power House Ground Mount - 6 x SH230-ON |
| PH-2T-GM8 |
Power House Ground Mount - 8 x SH230-ON |
|
SPEC Sheets: HES Solar Mount Options
|
 |
Top of Pole Mounts
 POWER HOUSE top of pole mounts are made out of 6063, and 5052 Aluminum. The combinations are known for their good framing strength, and corrosion resistance. All fasteners are made of stainless steel. The mounts are designed to tilt from 0° to 70° in 15° increments.
The user is required to supply the concrete and the pole for the TPM Mount. We recommend a steel schedule 40 pole that can be purchased from your local plumbing/steel supply store.
|
| |
SH-80
| SH-130 |
SH-170 |
SH-235 |
| TPM1 |
TPM1-SH-80 |
TPM1-SH-130 |
TPM1-SH-170 |
- |
| TPM2 |
TPM2-SH-80 |
TPM2-SH-130 |
TPM2-SH-170 |
- |
| TPM3 |
- |
TPM3-SH-130 |
TPM3-SH-170 |
- |
| TPM4 |
- |
TPM4-SH-130 |
TPM4-SH-170 |
- |
| TPM6 |
|
- |
TPM6-SH-170 |
TPM6-SH-235 |
| TPM8 |
- |
- |
- |
TMP8-SH-235 |
| TPM12 |
- |
- |
- |
TPM12-SH-235 |
|
|
 |
Horizontal Roof Mount
Secure your smaller array with these simple, inexpensive roof mounts. These roof mounts feature adjustable aluminum brackets that allow the angle to be optimized for your location.
Secure to your roof with bolts or screws; the solar array will be rigid and strong. The user is responsible to supply hardware for fastening the mount to the roof into the roof trusses/structural members. For roof top installation we recommend stainless steel 3/8" lag bolts.
|
| |
SH-80
| SH-130 |
| HRM1 |
HRM1-SH-80 |
HRM1-SH-130 |
| HRM2 |
HRM2-SH-80 |
HRM2-SH-130 |
|
|
 |
Vertical Pole Mounts
POWER HOUSE vertical pole mounts are made out of 6063, and 5052 Aluminum. The combinations are known for their good framing strength, and corrosion resistance. All fasteners are made of stainless steel.
The mounts are fixed at 90°.
|
|
|
